Announcement

Collapse
No announcement yet.

plugs/wires

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    plugs/wires

    I will be doing a tune up on my new bike (82 GS1100) I need to get spark plugs and wires. Since I am going to buy new ones anyway I was curious if there were any performance options on these, or are the factory spec ignition parts the best option?

    also, I need to find some good mailorder companies for parts. Any help would be greatly appreciated.

    thanks

    #2
    I have had good luck with Z1 Enterprises. They have really been helpful and patient with me everytime I have dealt with them. Their prices are very good too. The owner (Jeff) also is a GS Resource member and frequently responds to post. http://www.z1enterprises.com/default.aspx


    Richard

    Comment


      #3
      I second that suggestion. Jeff's great to deal with.

      Comment


        #4
        Have you already modified your coils to allow the wires to be removed. another wire option is an accel 7mm automotive kit. I can make 2 sets of/4 excellent wires for such a reasonable price.

        Comment


          #5
          removeable coil wires

          Originally posted by scotty
          Have you already modified your coils to allow the wires to be removed....
          Where can I find the above procedure? Thanks in advance

          Comment


            #6
            Originally posted by rkubik
            Where can I find the above procedure? Thanks in advance
            Lots of the gang just slowly and carefully dig out the glue that holds the original wires in place. I never did it i just used dyna replacement coils. Ask and lots of the gang know how to do it. I cant help there. Sorry

            Comment


              #7
              I was just looking at that last night.. I think ill just go with the dyna coils


              what ohmage should I go with?

              Comment


                #8
                3 ohm coils.

                Comment


                  #9
                  Originally posted by RotaryRodder
                  I was just looking at that last night.. I think ill just go with the dyna coils


                  what ohmage should I go with?
                  i believe the primary is a 2 to 5 ohm. Dont you have a service manual???
                  again i will be corrected if im wrong. I think my dynas are 3 ohm. Its been a few years.

                  Comment


                    #10
                    Just my 2 cents, If you are going with the Dyna the coils you want are GREEN. 3 ohms.

                    Comment


                      #11
                      You can get low mieage GSXR, Bandit, or Katana coils on Ebay usually for about $30 a set that are just like your originals.

                      Comment

                      Working...
                      X