Announcement

Collapse
No announcement yet.

Different 1150 head/valve covers???? HELP!!!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Different 1150 head/valve covers???? HELP!!!

    Were there different 1150 heads and valve covers? The 1150 head / cover and bolt combination I have doesn't work. I would have thought they would have all been the same.

    If I measure the depth from the rubber seal to the top of the cam cap where the bolts thread in, I read around 0.32" The bolts I got from Schintz for the 1150 have a shoulder of about 0.74". These are Suzuki PN 09106-07002.

    Any idea what year part these are, or what the bolt part number I need is?




    #2
    It looks different than mine ('85 1150E). I thought they were all same. The pic in my shop manual looks like mine. Here's some pics of mine. Hope they help



    85 GS1150E May '06 BOM
    79 GS1000S Wes Cooley Beast





    Comment


      #3
      Part numbers for the cover all the same for all three years (just checked)
      85 GS1150E May '06 BOM
      79 GS1000S Wes Cooley Beast





      Comment


        #4
        Looks like there are two sizes for the bolts... the ones you have and 09106-00701
        Last edited by renobruce; 03-12-2006, 07:14 PM.
        85 GS1150E May '06 BOM
        79 GS1000S Wes Cooley Beast





        Comment


          #5
          Ryan set me clear on this one. There are 2 sizes used on the cover. I never got far enough to look.

          I have the short ones on order now. Thanks for your help. Nice looking engine. Would make a nice drag bike.

          Comment

          Working...
          X