Shift light?

[odl777]

How can i hook up a shift light that goes in a car to work on my bike. here is an example of what i am think about using. thnaks

http://cgi.ebay.com/ebaymotors/BLACK-PRO-SHIFT-LIGHT-BMW-5-7-8-SERIES-323_W0QQcmdZViewItemQQcategoryZ33679QQitemZ8059919139QQrdZ1

or ebay Item number: 8059919139

[smithbm]

Why would you want to install a shift light on a bike?

[odl777]

i dont like haveing any gauges. Want a real clean look for a cheap price. Plus why look down at the tach when a light can tell you.

[JHawkins]

A Dyna 2000 can be set up with a shift light I think.

Check out www.dynaonline.com.

[odl777]

yeah i have a dyna s, and want it to work with that.

[bwringer]

Interesting idea...

I've seen LED tachometers that are basically a row of different colored LEDs. Something like that could be neat if you're into soldering -- you could hide the LEDs in some creative way so you just get different color glows depending on RPM.

I don't know of any plug-in type system, though. I bet some chopper maker somewhere is working on it, but it'll probably redline at 4,500 RPM.

[odl777]

see i was thinkng you could wire it to the dyna s some how, but how is the question. I dont care if it even just comes on wheni need to shift. But i liked you idea something to ponder. thanks

[scotty]

Usually shift lights have instructions for 4, 6. and 8 cylinder engines. your bike is a 12 volt system and so are most cars. My guess is that it should work. I have had 2 bikes with shift lights and the spot that takes the tach reading is the important connection.

[rosco15]

I have one of these on my busa. Not sure how it would work on your application.

http://raptorperformance.com/

[RifRafRacing]

shift light

I use an Auotometer on my 81 that takes the rpm pills,It is made for a motorcycle.It has a switch for single(twin) or double(4 cylinder) pulse.I think the automobile ones can be setup to work on a bike. Steve

[scotty]

I use an Auotometer on my 81 that takes the rpm pills,It is made for a motorcycle.It has a switch for single(twin) or double(4 cylinder) pulse.I think the automobile ones can be setup to work on a bike. Steve

I HAD THE AUTOMETER ON MY BUELL. THE ONLY COMPLAINT I HAD WAS THAT UNLIKE THE ONE ON MY SUZUKI, YOU COULD NOT CHANGE THE RPM SETTING USING DIP SWITCHES. OTHERWISE IT WORKED WELL AND WAS MADE WELL.