Andrews cams

[pan]

I have just picked up a used set of GS1000 cams but cant find any info for them. The guy that sold them said they are Andrews stage 3 but stamped into the end of both cams is 2S. Any info or help on the spec would be appreciated.

Mark...

[pan]

Sorry just found this :-

http://www.andrews-products.com/PDF_files/Suzuki-2V.pdf

I would still like to know what people think of this cam spec, and what its likely to be like if used in a road bike.

Mark...

[triffecpa]

Mark

I run a set of Andrews 2s cams in my GS1000 roadrace bike. They aren't real radical and would make a fine set of cams for a street bike.

Tracy

[pan]

Cool, whats what I wanted to hear :-) I think that I may need to pocket the pistons though as I run 1085 high comp pistons. With some nice carbs I think it should go well!!

[triffecpa]

My bike runs Wiseco 1085 pistons. Plus I have the newer GS 8 valve head with the larger valves. The head was decked about .040" (I bought the head already machined) and I don't have any piston to valve clearance problems. I did need to clearance the head though for the larger lobes to turn in the head. Not a big deal though.

Tracy

[Pharkmeh]

Mark

I run a set of Andrews 2s cams in my GS1000 roadrace bike. They aren't real radical and would make a fine set of cams for a street bike.

Tracy

another gem of info saved to my restoration file - thx\\/