techy required

[GS Racer]

Hi
I've got a GS750 and want to run a larger diameter fork mybe a late GS1000 or gsx. Does anyone know a suzuki front end that fits the 750 steering stock so I could just swap the yokes and forks without all the pain of getting a new set of yokes made

Cheers

[HiSPL]

Try a search. There's a wealth of information on the subject.....

[blackwolf]

Ithink theirs no different in fork gs series except the anti dive on the gs1000sz, so it would'nt matter, I check the ssteering hesd bearing and their the same.

[robinjo]

Two-valve 750 used ball headbearings with different diameter.

[brit7.11]

On my 7/11 (79 750 frame) I've got 86-88 model GSXR1100 forks.

You need to press the 750 stem out of the yoke, get a sleeve turned up and then press the two of them back into the gsxr bottom yoke.

You will then have to modify the lockstops etc.

As has been said, the head bearings on the 2 valve 750 were smaller than the GS1000 and other larger Suzies.