Announcement

Collapse
No announcement yet.

GS1000 Ninja Brake mod w/ pics

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    What are my options for braided steel brake lines? Did I see somewhere that a kit for a ZG1000 (Concours) would fit? Is there a kit that has a single line down from master cylinder and then a short line from one caliper over to the other that will fit?

    Comment


      This is a smoking deal at the moment...



      Ignore the BMW bit, it's two lines to your spec. I would go with 2 lines direct from the master to the calipers in which case you'll need a 30" & a 31" I think (maybe 31" & 32 or 33", please check). Straight banjo one end, 15 degree for the master OR what I'm trying next which is one long one direct to right caliper (30" with straight one end & 15 degree the other) plus a short one (about 25" total) to loop over the top of the front fender. That's the way a lot of the Galfer kits work.

      Dan

      Dan
      1980 GS1000G - Sold
      1978 GS1000E - Finished!
      1980 GS550E - Fixed & given to a friend
      1983 GS750ES Special - Sold
      2009 KLR 650 - Sold - gone to TX!
      1982 GS1100G - Rebuilt and finished. - Sold
      2009 TE610 - Dual Sporting around dreaming of Dakar..... - FOR SALE!

      www.parasiticsanalytics.com

      TWINPOT BRAKE UPGRADE LINKY: http://www.thegsresources.com/_forum...e-on-78-Skunk/

      Comment

      Working...
      X