GS1000 Ninja Brake mod w/ pics

[mills]

What are my options for braided steel brake lines? Did I see somewhere that a kit for a ZG1000 (Concours) would fit? Is there a kit that has a single line down from master cylinder and then a short line from one caliper over to the other that will fit?

[salty_monk]

This is a smoking deal at the moment...

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=270459275500&viewitem=&sspagename=STRK%3AMEWAX%3AIT

Ignore the BMW bit, it's two lines to your spec. I would go with 2 lines direct from the master to the calipers in which case you'll need a 30" & a 31" I think (maybe 31" & 32 or 33", please check). Straight banjo one end, 15 degree for the master OR what I'm trying next which is one long one direct to right caliper (30" with straight one end & 15 degree the other) plus a short one (about 25" total) to loop over the top of the front fender. That's the way a lot of the Galfer kits work.

Dan

Dan