Hi! I've gotten an '82 1100e complete roller minus motor/project that is very clean.. I have a '85 1150 thats done and have an 1150e stock swingarm extra cause my "done" bike has a longer one.So, 1st will the stock 1150 arm bolt up to 1100 frame width-wise without cutting? I have a 6in. zx12r wheel from my old bike still and wonder if that wheel will mount up. I will need spacers for the wheel, and offset for countersprocket but will a zx12r axle for the 12's wheel work on the 1150 arm? Any better, easier ideas? Someone done anything like this? I'll be lookin' for an 1100e motor too! Or, if the zx's axle can work on the gs arm, Ishould put the zx12 wheel on the 1150 because it already has a Kosman widened 6in. wheel on it now but I'm haveing problems finding a 170/60/118 tire to replace on it, has a yokohama (pre-skinko) on now, worn, but skinko no longer makes this size. anyone know who makes a tire for my Kosman wheel? The zx's wheel has more size options avaliable. Thinkin' out loud, A.J.
.png "Powered by vBulletin")
Required reading for all forum users!!!
Welcome!
Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.A note to new registrants...
All new forum registrations must be activated via email before you have full access to the forum.A Special Note about Email accounts!
DO NOT USE sbcglobal.net, att.net, bellsouth.net or email.com email addresses when registering for the forum! Email that our system sends out to these email servers is treated as SPAM and you will never receive your activation email, or any other email that our system may send out. Use an email address from gmail.com or some other email server.A note to old forum members...
I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.
Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...
New users should be sure to read the FAQ as well as the posts in the Announcements forum. This will answer many of the questions you may have about how this forum works.
Before posting questions in the forums be sure to use the forum search function!!! Odds are your question has already been asked and answered before. And when posting, please make sure that you post to the correct forum.
Finally, be sure to check out BassCliff's website here. He has useful information that can't be found on this site. His welcome page containing useful GS information can be found here. Be sure to check it out!
If you are a returning visitor to the forum and can't log in using your old forum name and password, chances are your account is deleted. Just create a new forum account and you should be all set.