carbs for 80 gs 850

[Anonymous]

does any one know of any other carbs will work having clearance problems with the timing chain adjuster have a set of 33mm smoothbores but wont clear adjuster

[Dink]

Have you considered swapping to a manual adjuster? they are much smaller, and quite cheap.
Dink

[Don Lobacz]

Is it possible that the adjuster is installed upside down? I thought that there were some adjuster bodies that went down and to the right. Backwards would put it up and to the left and possibly in the way of the carbs. I am not that familiar with the 850 adjuster, but I've never heard of a carb clearance problem before. Anyone?

[shaftzuki]

I've had the recent experience of using 1100e carbs on my 1000g - the only interference was with the tensioner ... the 1100e carbs don't have the notch in the bottom rail (that holds all of the carbs together) like the original 1000g carbs. Just made a rail switch and it worked fine! 8)