Announcement

Collapse
No announcement yet.

Cam Chain Guide Replacement

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    Cam Chain Guide Replacement

    I have a 1980 GS1100E with a 1166 Kit, V and H Header, and a stage 3 jet kit with pods. The other day I purchased a new Cam Chain Guide from APE but when I went to replace the worn out one I was no sure how to remove it from the barcket that holds. The pin that holds it in place seems to be a permanent connection. Before I start to work on it I would like a little advice about the process. I do not want to destroy the old unit thinking I know what I need to be done. Thanks for the help!!!!

    The Beast
    Tags: None
    #2
    On mine I just put it in a vise and used a punch the same size, a couple taps and it came right out.

    Can you post a pic of it??
    1166cc 1/8 ET 6.09@111.88
    1166cc on NOS, 1/8 ET 5.70@122.85
    1395cc 1/8 ET 6.0051@114.39
    1395cc on NOS, 1/8 ET 5.71@113.98 "With a broken wrist pin too"
    01 Sporty 1/8 ET 7.70@92.28, 1/4 ET 12.03@111.82

    Comment

      #3
      I do not have a home computer and my work computer will not allow me to load anything. As for the Chain Guide I thought that all I needed to do was punch it out or if needed drill it but I thought I would ask before I started the work. Thanks for all of the help!!

      The Beast

      Comment

      Previous template Next
      Working...
      X