1150 block on 1100

[zooke-158]

Will the 16v 1150 block bolt onto the 16v 1100 and still use the 1100 head?

[lecroy]

Block is the same but the wrist pins are larger on the 1150.

[zooke-158]

Thanks for the info.

[rapidray]

The block is SIMILAR but NOT the same. You can go 77mm bore to build 1229 with the 1150 block but the sleeves fit a LOT closer to the cases! You shouldn't have any problems as I use these blocks for exactly this purpose all the time. Just check to see how close the sleeves end up to the cases. Ray.

[Addy Leung]

I collected 1150 block
What I see is that the out look of 1100 block fins are more round shape and it is look more classic.
the 1150 fins are square shape and it do not match the shape of 1100 head out look.

[Big Jay]

Also, the 1150 block is not drilled and tapped for the 6 mm screws that go in the ends of the 1100 block.

Jay