.png "Powered by vBulletin")
For you guys with GS 1100s & 1150s looking for every trick you can do for cheap, change your 9mil valve adjuster lock nuts to the 8 mil GSXR nuts. In the valvetrain every little bit you can lighten helps & it may not seem like a lot but it ALL adds up! Ray.
-
-
Yeap and if you go with a gsxr head the valve stem's are 5 mm as compared to the 1100/1150 5.5 mm ones.1166cc 1/8 ET 6.09@111.88
1166cc on NOS, 1/8 ET 5.70@122.85
1395cc 1/8 ET 6.0051@114.39
1395cc on NOS, 1/8 ET 5.71@113.98 "With a broken wrist pin too"
01 Sporty 1/8 ET 7.70@92.28, 1/4 ET 12.03@111.82 -
Hey, this is kinda related, ...a #2 robertson screw makes an excellent valve adjusting tool for the 16v, just screw it into a little piece of wood or sumthin' fer a handle eh... only in canada.GSX1300R NT650 XV535Comment
-
R U talking abt the square screw driver? But then I don't understand the wood handle.Comment
-
Yea, but not the screwdriver, the screw, the the setsrews on the bike have square male heads the same size as a #2 , so u use a short screw inverted the little piece of wood(or several wraps of tape) is just easier to turn than holding the screw by the threads.
ie ,short deck screwGSX1300R NT650 XV535Comment
Comment