.png "Powered by vBulletin")
UPDATE!!!! Got the cylinders back from my bore guy, 1229 and looking good after my paint job...
-
-
Nice and clean holes...
Comment
-
Got the bottom half of the bottom end cleaned and painted,just waitng for the top cases to get bored...
Comment
-
It`s starting to look like something again8-[
Comment
-
Last one for now,I had to put the old shocks back on for temporary due to I don`t have those trick fox shox back yet.
Comment
-
Cylinders look great!
Are you going to let me ride it BUDDY!
Need a hone?
1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
Comment
-
Sure I will let you ride it, let your check book be your guide:shock: . Just got a call from the guy that is rebuilding the shocks,they will be done this Fri.\\
/
Comment
-
MORE PICTURES:shock:....tail light assembly. Made to my liking and very very bright.
Comment
-
Another view...
Comment
-
The engine,an empty hulk for now but it`s all painted and bored. Now all that is left is to fill it with LIFE MMMMUUUWWWAAAAHAHAHAHAHAHAH (evil laugh)
Comment
-
Last one for now...
Comment
-
Beautiful!!! When we get my motor straight I'm next! You do good work Kris.1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
Comment
-
Thanks Bill,I am getting really amped about this project. This will be my best yet!\\/
Comment
-
UPDATE!!!!! Wiring is almost done, so is the engine. This is a BUSY set of handle bars:shock:
Comment
-
VERY busy8-[
Comment
Comment