i had a hard on for a fat tire so i parted out a hole 97 tls1000 that ran!!
the first part i did was swap all the front end parts i could over to the 81 gs750e front end went on very eazy and i only had to have 1 top bearing
made. next was the hole tls1000 tail end! the swing arm had to have more mod's but in one night any one can do it and not have to change the brake set up from stock... yaha the bike is not done i still am test fitting thing's
like a nos bottle!!! but i need a rear tire huger first. the swing arm was a close but tight fit and with 30.000 remove from both side's of where the bolt go in it fit like stock. now this bike is set for street fighting and has (NO SHOCK'S) so i set the ride to look a Lil high and long much like a i.c.b.m. lol
and being 7 1/2 foot long with 6 foot wheelie bar's and that lovely 200mm rear i sure i will launch hard and fast. i had to buy ext block's to bring the tire back so it looked right cuz the stock tl swing arm's is shorter then a 81 gs one. so not it looks right to me and i can say i streached it! i will post more soon. please feel free to ask me any thing. this is a 100% poor boy race build out of the best bike's in the world SUZUKI BABY!!!
REMEMBER IM STILL BUILDING IT 2 MONTHS TO RACE TIME.
Comment