vance & hines

[Guest]

Can anyone tell me if the vance & hines pro exhaust will fit my gs 750. the pipe diameter is the same as mine.Also are they any good and are they loud?.

[Psalms23]

It should fit. I have one on my GS1100EZ that I am looking to get rid of. The exhaust I have also lists to fit a GS750. They do sound very good, I do have a baffle in mine, they do not come with one new. Mine is pretty good excecpt for some discoloration and a couple dents I put in it on number 2 and 3 pipes. I have a GSXR750 front end that causes the header to rub the front tire when braking. I tried to heat the number 2 and 3 pipes and bend them so that they would not rub, didn't work so well, it just caused the discoloration is all and I had to put a ping in 2 and 3 to help with clearance. I will sell it cheap if you have any interest. The megaphone is perfect, and it performs just fine. I assume you want a new one though, Let me know, thanks.

[rotty]

Are you sure it will fit?.What is the difference between a street pipe and pro?.I have the gsxr front end on as well.Mine is a 750 so i went up to a 17 inch wheel from 16.Do you think i will have the same problem you have?.Do you have any pics?.I would be interested.

Bill

[Psalms23]

My front wheel is also a 17in. from a GSXR1100. The Pro pipe is a sidewinder that exits the right side while the street version goes below the frame. You may have the same problem as me if you have a GSXR front end with inverted forks. The shorter forks just don't allow for the same distance for the sidewinder between the front wheel and the frame. I could send you some pictures, but I assume it will not work if you have inverted forks.

[rapidray]

Are you sure it will fit?.What is the difference between a street pipe and pro?.I have the gsxr front end on as well.Mine is a 750 so i went up to a 17 inch wheel from 16.Do you think i will have the same problem you have?.Do you have any pics?.I would be interested.

Bill

If your 750 is an 83 or later you will have to take a grinder to the 1100 exhaust to reduce the diameter a little where it goes into the head. It is easy & you don't have to remove a lot of material. Ray.

[rotty]

Yes i have inverted forks as well..I was looking for a magphone for my bike.I like the old school look.I can get a ssr2 but i like the look of the magaphone.

Thanks anyways.

[Psalms23]

I think you would do better looking elsewhere, the 1100 sidewinder would be a challenge with your bike. Best wishes.

[tkent02]

Sidewinders are great if you don't turn right much.
Like a NASCAR bike.

[TheCafeKid]

It should fit. I have one on my GS1100EZ that I am looking to get rid of. The exhaust I have also lists to fit a GS750. They do sound very good, I do have a baffle in mine, they do not come with one new. Mine is pretty good excecpt for some discoloration and a couple dents I put in it on number 2 and 3 pipes. I have a GSXR750 front end that causes the header to rub the front tire when braking. I tried to heat the number 2 and 3 pipes and bend them so that they would not rub, didn't work so well, it just caused the discoloration is all and I had to put a ping in 2 and 3 to help with clearance. I will sell it cheap if you have any interest. The megaphone is perfect, and it performs just fine. I assume you want a new one though, Let me know, thanks.

I would likely be interested in your pipe, what are you asking for it?

Thanks

TCK

[Psalms23]

With the condition of the pipe, it is pretty much new, but with the stuff I did to it, maybe $100? The megaphone is perfect it's just the number 2 and 3 pipe on the header. Maybe you can leave your info in the message center and we can discuss this outside of this guys thread, thanks.