From what I've read so far, it seems to work just fine. Should I even be thinking about the "Dark Side"?
Announcement
Collapse
No announcement yet.
Car Tire
Collapse
X
-
cberkeley
Car Tire
Been doing some reading on folk using a 195/60-16 Car Tire on the rear of their cruisers.
From what I've read so far, it seems to work just fine. Should I even be thinking about the "Dark Side"?
Tags: None
-
Forum LongTimerGSResource Superstar
Past Site Supporter- Oct 2006
- 13969
- London, UK to Redondo Beach, California
I would have thought it makes it turn even worse that a cruiser does as stock... I have an Intruder at the moment with Avons on it & there is a very definite profile even though the rear tyre is fat...
Dan1980 GS1000G - Sold
1978 GS1000E - Finished!
1980 GS550E - Fixed & given to a friend
1983 GS750ES Special - Sold
2009 KLR 650 - Sold - gone to TX!
1982 GS1100G - Rebuilt and finished. - Sold
2009 TE610 - Dual Sporting around dreaming of Dakar..... - FOR SALE!
www.parasiticsanalytics.com
TWINPOT BRAKE UPGRADE LINKY: http://www.thegsresources.com/_forum...e-on-78-Skunk/
-
Nicholaschase29
Car tires are probably a lot harder than bike tires and don't grip as well. If you're powering out of a turn and lose traction it could be a sad day. Just something to consider
Comment
-
And when in a turn, as the tire's contact patch goes from being many inches wide to about one, and the rear wheel spins up effortlessly, allowing the back of the bike to step out so far you no longer need a rear view mirror to see the road behind you, you may ask yourself, "Self, why did this seem to be such a good idea at the time?"
Comment
-
Junkie
Originally posted by Nicholaschase29 View PostCar tires are probably a lot harder than bike tires and don't grip as well. If you're powering out of a turn and lose traction it could be a sad day. Just something to consider
but yeah, contact patch in a turn will be... small.
Comment
-
focus frenzy
not to mention what it is going to do to the frame and the frame geometry when you try to lean into a turn and it resist so you push harder and harder and it suddenly pops over and the frame unloads.
VERY scary!!
you can feel the differance clearly when you take off a old squared off motorcycle tire and put a new one on.
on a cruiser that goes from one bar to the next it might be ok, but if you like to hit the twisties and get a bit agressive you will be in a world of hurt pretty quick.
Comment
-
cberkeley
-
You might want to check with your insurance company first cause if you caused an accident it might be used against you.
Plus I'd like to see a vid of them in the rain going around a curve ????????1166cc 1/8 ET 6.09@111.88
1166cc on NOS, 1/8 ET 5.70@122.85
1395cc 1/8 ET 6.0051@114.39
1395cc on NOS, 1/8 ET 5.71@113.98 "With a broken wrist pin too"
01 Sporty 1/8 ET 7.70@92.28, 1/4 ET 12.03@111.82
Comment
-
A local guy runs one on his bike. He rides it on the street mostly, but drag races it too.. He must be too cheap to bother swapping wheels. He has a Harley FXDGHERNBRFYTESGGDHDDPGB something or other, so it probably doesn't turn worth damn anyway. It only has to turn four ways -
in & out of the bar
in & out of the service dept
Comment
-
GER144
Stay away from the car-tire! Bad, bad idea!! There is a guy who comes into the shop I work at that has a VS1400 (or 1500?) Intruder with a small car-tire on it. I don't think I ever rode a more dangerous handling bike. The thing did not want to turn corners. At real slow speeds it's sort of rideable, but at any speed the thing was really nasty!
Comment
-
Originally posted by cberkeley View PostBeen doing some reading on folk using a 195/60-16 Car Tire on the rear of their cruisers.
From what I've read so far, it seems to work just fine. Should I even be thinking about the "Dark Side"?
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
Comment
Comment