Announcement

Collapse
No announcement yet.

Slide lift hole/port?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Slide lift hole/port?

    From the top of the carbs looking down from the seat which hole/port is for the slide lift. trying to install stage 3 kit and dont know which port to drill.

    #2
    It's the hole at the bottom next to where the needle hole is. Do not drill the needle hole in the center but the port off to the side.
    1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
    1985 GS1150ES stock with 85 Red E bodywork.

    Comment

    Working...
    X