.png "Powered by vBulletin")
more 750 to 850 ??
So i was told by helpful memebers on this site that a 78 750 and a 79 850 can swap barrels and pistons, but does that mean you can use the 750 connecting rods and all the other internal stuff or do you need 850 stuff. and also would the 750 exhaust and carbs still work fine for the 850 barrels??
-
-
would i need to get a bigger set of carbs to handle the gas intake of the 850 performance, or would i just wanna go cv carbs instead of my mikuni?? -
It's all the same except the cylinders and pistons, all of it fits.
Life is too short to ride an L.Comment
-
thats awesome. thanxComment
-
The CV carbs that would go with that (if they came of a GS) would still be Mikuni.Originally posted by yamahafella03 View Post
Just use the carbs from the 850 donor bike.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)Comment
-
Carbs on early 750's and 850's are VM's - same size if I'm not mistaken. Not sure about jetting through.
On Basscliff's site he has both the 750 and 850 manuals, if you downloaded both manuals you could easily check to see how the jetting differs, if at all.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-ResurrectionComment
-
well thats good to :-)Comment
Comment