Announcement

Collapse
No announcement yet.

need ideas on rejetting

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    need ideas on rejetting

    i have an 850g 82 and i am wanting to get any ideas on rejetting the carbs this is what i am looking to do put pods on and have straight pipes added what kinda jets would anyone advise me to get?

    #2
    Originally posted by elevatorman71 View Post
    i have an 850g 82 and i am wanting to get any ideas on rejetting the carbs this is what i am looking to do put pods on and have straight pipes added what kinda jets would anyone advise me to get?
    Best bet is probably a kit from Dynojet, Stage 3, about $130.00. It will have the right main jets, and adjustable needles. OR you can buy adjustable needles and jets from Z1 and I think other places. On my 1000, pods and pipe are a 152.5 or a 155 (Mikuni). I think a 110 is stock, so you can see the kind of size difference.

    Comment


      #3
      now i just removed all the jets and stuff for my carb dip and i am new to this but i have read all the carb ideas on here how to rebuild my carbs. is that all i need ,and which jet is it you were talking about

      Comment


        #4
        Originally posted by elevatorman71 View Post
        now i just removed all the jets and stuff for my carb dip and i am new to this but i have read all the carb ideas on here how to rebuild my carbs. is that all i need ,and which jet is it you were talking about
        No need to change the pilot, or the air jet, just the main. It's the one that is on the main fuel tube, in the bottom of the carb.

        Comment


          #5
          Originally posted by elevatorman71 View Post
          i have an 850g 82 and i am wanting to get any ideas on rejetting the carbs this is what i am looking to do put pods on and have straight pipes added what kinda jets would anyone advise me to get?
          What do you mean by "straight pipes"? Baffles or no baffles? If you're talking no baffles, you're making a mistake. You need the back pressure to even get moderately close to a smooth running, street usable bike.

          If you've never delved in to jetting on carbs before, I hope you have a lot of patience. You'll need it.

          Good luck.

          Comment


            #6
            i am def considering some kind of baffles or a 4 into one kit from bike bandit ,that will come soon enuf.

            Comment


              #7
              does anyone have an idea how to get the baffles for a 1 3/4 exhaust pipe not a megaphone design just straight pipe style?

              Comment

              Working...
              X