.png "Powered by vBulletin")
OK, if you guys can help me get this solved I'll officially be done with this bike and the never ending upgrading for the season. Im running 36mm GSXR carbs with a 140 main and 32.5 pilot. I had 35s in but it was way too rich. I put the 32.5s back in tonight, and it's idling better than ever but for some reason #3 pipe isn't heating up. It's getting slightly warm, but even after 5 minutes of idling I could still completely grab it without burning myself. Couldn't do the same on the other 3 pipes. I'm assuming that 3 must be running rich but the mixture screw is out the exact same number of turns as 1 2 and 4. Any input would be appreciated. And yes, the valves were recently adjusted.
-
-
Fouled the plug when you were running the larger pilots?Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection -
DOH! I didn't even think of that, I was so concerned with the pilots and syncing that it totally slipped my mind! Ill start it up and pull that wire tomorrow, hopefully that's the problem.Originally posted by Nessism View PostComment
Comment