Announcement

Collapse
No announcement yet.

GS750 E Parts

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    GS750 E Parts

    Hello I am working on an 82 GS750E and I have been looking for parts. I have been able to find some ok sites but since I am trying to do a rebuild I have not found some cheaper and easier places to go. Since, I am college student money is hard to come by, but if you know of a place or advice I would appreciate it.

    Thanks

    #2
    Hi and welcome, use the search function, plenty info to be found here, and go have a look at the Links forum.
    You will find everything you need.

    Comment


      #3
      Welcome to GSR !

      What all do you plan to do to your engine ?

      Comment


        #4
        part

        I bought clip on from Jetta90 and he advised me that he has a few parts for this bike. Had great service so maybe you can drop him an PM...

        Comment


          #5
          Rebuild

          Well when I was able to get it started it was leaking oil into the cylinders on one side of the engine. I am probably for sure going to resurface the heads to get a better seal and valve guides. I might look into doing other things but some parts that I have seen have been to much money and didn't know if some people knew some good places to look that are not on the links section.

          Comment


            #6
            Gs750s rule

            Comment


              #7
              how about some of this stuff

              Comment


                #8
                For stuff like gasket kits .. a lot of us go with

                Z1 Enterprises specializes in quality Motorcycle parts for Honda, Kawasaki, Suzuki and Yamaha Classic Japanese motorcycles from the 1970's and 1980's.


                and or



                Where is BassCliff with that link to everything a GSR member could ever want or need ?


                Originally posted by cborge View Post
                Well when I was able to get it started it was leaking oil into the cylinders on one side of the engine. I am probably for sure going to resurface the heads to get a better seal and valve guides. I might look into doing other things but some parts that I have seen have been to much money and didn't know if some people knew some good places to look that are not on the links section.

                Comment

                Working...
                X