Later model Suzuki exhausts compatible?

[makenzie71]

I was wondering if later model I4 exhuasts would bolt to an '81 GS750? I've got a lead on a mid 90's 4-2-1 GSXR exhaust and I was curious what the odds were...

[jed.only]

from what i read, yes, with mods. the collars likely wont work, and the bend radius sometimes doesnt work. read over the long-as-balls monoshock thread by 80gs1000.

[posplayr]

Gixxer pipes.

I have bolted a 86 GSXR 1100 (86-88) pipe to my GS1100ED; 80GS1000 has done a 2nd gen GSXR 1100 (89-92) . The spacing on the Water cooled are too close (93+).

Some same year GSXR 750's (85-91) might fit but they need to hang lower than required for teh 750 to account for teh longer 1100 stroke.

Not all will fit, they need to have similar tube bends on each pipe from the head to down tube as well as bilateral symmetry. (Most Yoshi don't fit)

Also the collars from a GS1100 will have to be welded to the GSXR pipe and the rear hander will have to be sorted.

http://www.thefreedictionary.com/bilateral+symmetry

I posted this a while back; there are three sets of GSXR 1100 headers. The stainless steel ones (86 GSXR 1100 and need collars modified) are the only ones that will fit. The other two hit the frame near the front of the engine at the frame cross memeber.

http://www.posplayr.100megsfree3.com/86_GSXR_1100/Gixxer_Two_Rights_Exhaust.pdf

[posplayr]

Bump

A pic of the 86 GSXR 1100 Muzzy bolted to my 83 GS1100ED. Note all clearances are good. The collars would have to be modded though.