Turn Signals For Running Lights

[the1pig]

So I came across this link

http://www.thisoldtractor.com/gtbender/mg_manuals/running_lights.pdf

Which is a schematic by Greg Bender.

I have been trying to adapt it to my 82 GS1100GK however I can get the lights to turn on as running lights but I cant get the Blinker to work. This bike has turn signal control unit. See attached Schematic.

Does any one know of a way to get this to work? I like the concept of having more lights on the Bike.

Thanks again for all of you help

[Griffin]

Are you using dual-filament bulbs?

[the1pig]

Are you using dual-filament bulbs?

No the current set up is signal filament. According to the specs laid out by Bender you should be able to use signal filament bulbs and make this work.

[curseboy]

you're going to need a different relay with NC contacts, and rewire your lights to switching ground. It's not difficult but you are gonna need to sit down with the wiring diagram from a haynes or whatever manual and figure it out.