Twinpot Brake upgrade on 78 Skunk

[salty_monk]

I got more bracket sets in recently. I also have a couple of complete sets of later model calipers, rotors & brackets (everything except the 10mm bolts).

[850GT_Rider]

Quick survey - anybody know who has the best price & delivery for OEM rebuild kits (basically just the spring & piston with seals) for the Kawasaki Master Cylinders? Looks to be part #43020-1054 for the one I have from a '99 Concours. Do NOT want K&L

Local guy & many online list the identical price of $46.39. Seems like some collusion going on?

Anyone seen it cheaper?

[mmattockx]

Local guy & many online list the identical price of $46.39. Seems like some collusion going on?

Anyone seen it cheaper?

List price is $46.39, so that is why the same price all over. Partzilla lists it for $33.42, no idea what shipping is.

http://www.partzilla.com/parts/detail/kawasaki/KP-43020-1054.html

Mark

[850GT_Rider]

Thanks. Looks like shipping would be about $8, so $41 total. Save at least $5 anyway.

[salty_monk]

Yes I've not seen it cheaper than that for new OEM.

if you need Pistons the 250 had one caliper on it up to 2006 and the pistons are likely to be decent on most available in my experience.

[salty_monk]

Reminding people that on the 80+ bikes you need to cut about 4mm off your speedo drive dust cover:

[erickson_ron]

i have read through this and must have missed something but I just bolted up discs from a '83 GS750 and everything looks great except the bolts bottom out. I noticed the disc mounting surface is thinner than on a '78. Do I need a spacer or shorter bolts?

[salty_monk]

Responded to your PM. Are you sure those rotors are 295mm? I think they are 274mm dia ones in which case they won't work. The Suzuki rotors usually used are the ones from the GS550E (it's a single brake model but you use two of the same rotor).

If those Suzuki rotors are the right dia (I vaguely remember there being a T model slotted Suzuki rotor that might be 295mm but I've never seen them personally) then a washer under the head will solve your issue or use the later bolts. You can probably even cut those down as long as there is adequate thread left.

Here's a pic of the Suzuki GS550 rotor in place.





Dan

[05Astro]

20160825_195910.jpg They work great! Thanks!

[salty_monk]

Looking good! Thanks for the picture

[salty_monk]

Hi Willie - posting this here as your PM box is full. - Dan

Here you go:
Calipers
2 x calipers from various bikes, mainly Kawasaki models-
EX 250 Ninja 1988 to 2007 (single caliper on right side)
EX 500 Ninja 1994 to 2007 (single caliper on right side)
ZL 600 B1 Eliminator 1995 to 1996
ZR 550 B1/B2/B3 Zephyr 1990 1992 1993
ZX 600 C1-C9 Ninja 600 R 1988 to 1996
ZR 750 C1/C2/C3 1991 to 1993
ZX 750 F1/F2/F3/F4 Ninja 1987 to 1990
ZG 1000 A9-A20 Concours 1994 to 2006
ZX 1000 B1/B2/B3 Ninja ZX10 1988 to 1990

Suzuki also used this caliper on the VX800, GS500 and the GSX1100G

CBR600 Rotors. F3, F4 & F4i. The 296mm dia ones. If you send me any links to ones you are looking to buy or pictures I can quickly tell you if they are the right ones.

[Class86act]

Salty, was wondering if you have any more adapters available for purchase.

[05Astro]

I have them on mine, you'll like them!

[salty_monk]

I have some more powdercoated black as always. I sent you a PM.

Dan

[WilliamK]

Salty, these are for sale now.
I have a 78 GS750E but will be have a 82-83 GS1100 (19 in) six spoke rim installed. Any considerations with that?
Also have a line on nice ZG1000 calipers.
What is included in your set? Mounting brackets I know. Rotor shim plates?

http://www.ebay.com/itm/New-Pair-Honda-Front-Brake-Rotor-Disc-CBR600F3-1995-1998-CBR900RR-1994-1997-/131972423445?hash=item1eba2b5f15:g:KQIAAOSw8w1YA7K0&vxp=mtr