GSXR/Katana Upgrades on my 550EF

[reddirtrider]

Looks good. Keep it up.

[Colorado85gs550]

Here's the new Custom Programmable Fuel Gauge that came in today:

[Colorado85gs550]

notice the Hayabusa symbol I had them put in the Gauge face

[Billy Ricks]

43mm on the forks. If you decide to go with clipons the holes for the risers could probably be welded up and polished out. This is the same size fork as the Katana 600 up until pretty recently and maybe even now. The GSXR600 used a 43mm fork up until 2000 or so when they went inverted.

[Colorado85gs550]

43mm on the forks. If you decide to go with clipons the holes for the risers could probably be welded up and polished out. This is the same size fork as the Katana 600 up until pretty recently and maybe even now. The GSXR600 used a 43mm fork up until 2000 or so when they went inverted.

Well.........the 95 Katana 600 clip-ons I have are too small! I'm not sure what direction I'll go there yet. I think the OEM clip-ons will put my bars more level with the ground and help my elbows a little. Missing the Radial Head in my left arm with a broken Coronoid Process and Radial Head fragments in my right arm with a torn Radial Nerve........

My arms hurt after 45 minutes of riding so I'm attempting to get my arms into a better position..........

[Colorado85gs550]

here's a video of my tail light with integrated turn signals.........after looking at this video I see that I need to wire the turn signals so that they are brighter!

http://s289.photobucket.com/albums/ll238/paulholcomb/?action=view&current=100_0983.flv

here's a video of my headlight conversion to the dual running lite setup

http://s289.photobucket.com/albums/ll238/paulholcomb/?action=view&current=100_0984.flv

[Colorado85gs550]

I have received my 90 GSXR750 Upper and Mid Fairings:

[Colorado85gs550]

[Colorado85gs550]

[Colorado85gs550]

windscreen, lower left, lower right, and lower center fairings should be here any day!

[Bad Kaw]

I love the way the side fairing panels drape over the front end in the profile shot; very "Tornado"-ish. You're definately going to have to address those clubman bars now!
Post up the fork-tube diameter; somebody will have something reasonable.
-KR

[martyman]

Its starting to look like a totally different bike...I'm still waiting to read how you do with the Stage three kit.

[jcoov1104]

I want more...

Any new updates? I just read my way through the whole thread and I can't wait to see how it looks now and what else you have done. It looks awesome by the way!

[Colorado85gs550]

bad accident and my wife has been in the hospital for 6 weeks now! I haven't had much time to do anything on it all summer and now hunting season is in 2 weeks for me........sorry that I don't have any more info or upgrades done on the bike.

Petcock failed back in August on my way to work and I haven't messed with it since.........

[Bad Kaw]

Wow...very sorry to hear that!!! Godspeed!