finished putting on my new exhaust.picked up the front section which is a 4-2-1 from a local wrecker not sure what make but it was close to fit,nothing a big rosebud couldent fix.fabricated a midpipe with some mandrel bent elbows and had the works sandblasted.Once the thing was bolted on with the new jardine can it was obvious it was too quiet so i took the muffler apart and fixed that for good,sounds awesome now not too loud with a nice tone.had to get rid of that v+h it was too flashy.I have gained about 2" clearance to boot.right in the middle of installing a new ignition too dyna2000,coils,wires,shift minder and light.cant wait to take her for a rip with the new goodies
Announcement
Collapse
No announcement yet.
GS1100E project
Collapse
X
-
amxsteve
new exh pic
finished putting on my new exhaust.picked up the front section which is a 4-2-1 from a local wrecker not sure what make but it was close to fit,nothing a big rosebud couldent fix.fabricated a midpipe with some mandrel bent elbows and had the works sandblasted.Once the thing was bolted on with the new jardine can it was obvious it was too quiet so i took the muffler apart and fixed that for good,sounds awesome now not too loud with a nice tone.had to get rid of that v+h it was too flashy.I have gained about 2" clearance to boot.right in the middle of installing a new ignition too dyna2000,coils,wires,shift minder and light.cant wait to take her for a rip with the new goodies
-
Colin Green
-
cavehamster
What front end setup do you have there? I picked up some USD forks that look the same as what you have, but I haven't dug up the wheel and etc yet and could use some input. How is the ride height with those forks? Looking really good!
Comment
-
amxsteve
Originally posted by cavehamster View PostWhat front end setup do you have there? I picked up some USD forks that look the same as what you have, but I haven't dug up the wheel and etc yet and could use some input. How is the ride height with those forks? Looking really good!
Comment
-
mattf
-
blackout_GS1100
-
amxsteve
Originally posted by posplayr View PostNeed some close ups of those pipes. Do you know if they were off of a Suzuki?
Comment
-
amxsteve
here,s a side view
can somebody tell me how to post more than 1 pic at a time i always get the message you have uploaded the maximum of 1
Comment
-
madbikebreaker
Nice pipes. They give the ground clearence of stock pipes. We need to find out what they are cause I want some!
Comment
-
amxsteve
turbo time
It has been great riding the gs but something is missing,MORE POWER.So i picked up a MR turbo kit to strap on,so much for the fancy 4-2-1 pipe. I cant wait for it to show up and get it on there is still lots of summer left.Will post pic,s when it gets here
Comment
-
jwhelan65
Originally posted by amxsteve View Posthere,s a side view
can somebody tell me how to post more than 1 pic at a time i always get the message you have uploaded the maximum of 1
First make sure you have both GSR and Photobucket tabs open..
1. Open up a Photobucket account (free)
2. Upload your photos into Photobucket
3. From Photobucket click copy on the photo you select
4. Navigate back to GSR tab
5. Click on the little yellow icon above ( bottom row, 5th one in )
6. Paste the link of your photo into the small box that will pop up.
7. Make sure your cursor is where you want the photo.
8. Press enter
9. Photo should appear in thread.
10. Repeat for multiple photos
Any questions shoot me a PM
Joe
Comment
-
amxsteve
guess what im,e doing this weekend
Turbo just showed up so this weekend will be spent installing it on my gs.it will make a good test bed for the mill i will be installing in the kat this winter.The wife figures i am acting like my 5 yr old and i guess she,s right.but arent we all just big kid,s at heart
Comment
-
Bad Kaw
Comment