Announcement

Collapse
No announcement yet.

79' GS850 Brake upgade!!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    79' GS850 Brake upgade!!

    Well thanks to a few guys from this site I was able to upgrade the brakes on my 79' GS850.

    Installed brakes from a 1980 GS1000.

    Looks like Ill be able stop on a dime now...

    #2
    The brake calipers look great but please ditch those old rubber lines. Suzuki call for replacing them every two years so you are 29 years overdue.
    Ed

    To measure is to know.

    Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

    Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

    Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

    KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

    Comment


      #3
      Originally posted by Nessism View Post
      The brake calipers look great but please ditch those old rubber lines. Suzuki call for replacing them every two years so you are 29 years overdue.
      Good suggestion. Even better to replace them with after market stainless steel lines and fit some dupont kevlar pads as well. Makes a huge difference to braking performance on these bikes.
      :) The road to hell is paved with good intentions......................................

      GS 850GN JE 894 10.5-1 pistons, Barnett Clutch, C-W 4-1, B-B MPD Ignition, Progressive suspension, Sport Demons. Sold
      GS 850GT JE 1023 11-1 pistons. Sold
      GS1150ES3 stock, V&H 4-1. Sold
      GS1100GD, future resto project. Sold

      http://i155.photobucket.com/albums/s...s/P1000001.jpg
      http://i155.photobucket.com/albums/s...s/P1000581.jpg

      Comment


        #4
        Originally posted by 49er View Post
        Good suggestion. Even better to replace them with after market stainless steel lines and fit some dupont kevlar pads as well. Makes a huge difference to braking performance on these bikes.
        Stainless/Teflon...yes, of course! http://www.thegsresources.com/_forum...d.php?t=114521
        Ed

        To measure is to know.

        Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

        Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

        Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

        KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

        Comment


          #5
          Thanks. I will have to check that out!

          Comment


            #6
            Originally posted by 49er View Post
            Good suggestion. Even better to replace them with after market stainless steel lines and fit some dupont kevlar pads as well. Makes a huge difference to braking performance on these bikes.
            where do you get these pads??
            John 3:16

            Comment


              #7
              Originally posted by GabrielGoes View Post
              where do you get these pads??
              A very good question. I still have a set that was fitted to the later model calipers now on the bike. From my research, I believe they originated from the UK. I haven't been able to locate a replacement Dupont set yet. I did locate a cheap set from Taiwan, but aren't sure of their exact composition or quality yet.

              The Dupont Kevlar's are lasting really well and are easy on the rotors. If you do locate a source, please let us know of it's whereabouts!
              :) The road to hell is paved with good intentions......................................

              GS 850GN JE 894 10.5-1 pistons, Barnett Clutch, C-W 4-1, B-B MPD Ignition, Progressive suspension, Sport Demons. Sold
              GS 850GT JE 1023 11-1 pistons. Sold
              GS1150ES3 stock, V&H 4-1. Sold
              GS1100GD, future resto project. Sold

              http://i155.photobucket.com/albums/s...s/P1000001.jpg
              http://i155.photobucket.com/albums/s...s/P1000581.jpg

              Comment


                #8
                EBC makes a kevlar pad (dupont kevlar is a brand name not necessarily the company that manufactured the pads)

                Comment


                  #9
                  Originally posted by almarconi View Post
                  EBC makes a kevlar pad (dupont kevlar is a brand name not necessarily the company that manufactured the pads)

                  http://www2.dupont.com/Kevlar/en_US/...utomotive.html
                  Thanks for the link. I re-checked my Kevlar pads. The brand name is "Premier". I've found pads under this brand for other bikes, but none are listed as available for the GS850-1100G series.
                  :) The road to hell is paved with good intentions......................................

                  GS 850GN JE 894 10.5-1 pistons, Barnett Clutch, C-W 4-1, B-B MPD Ignition, Progressive suspension, Sport Demons. Sold
                  GS 850GT JE 1023 11-1 pistons. Sold
                  GS1150ES3 stock, V&H 4-1. Sold
                  GS1100GD, future resto project. Sold

                  http://i155.photobucket.com/albums/s...s/P1000001.jpg
                  http://i155.photobucket.com/albums/s...s/P1000581.jpg

                  Comment

                  Working...
                  X