i have a near new billet basket i'd like to sell..haha
Announcement
Collapse
No announcement yet.
What to do with crankshaft
Collapse
X
-
Yup, me too. With inner hub and plates and lock-up and 40MM CV carbs too. I have too much.
Tanx
Gregsigpic1983 1100 Katana - soon to be turbo Busa powered.
2007 GSXR1K-Sold-But not forgotten.
Have 2X ZG14 engine's for '81 GS750E project.
'82 GS750E frame is TITLED awaiting GSXR1127/12B engine and '81 1100E slowly being built.:eek:
Comment
-
gsryder
I will second a good opinion on John Pearson. Just got my block back from him after he decked it and wired it as well as some pistons and a clutch basket. Good guy real straight shooter and very helpful and forthcoming with advise.
Comment
-
Originally posted by blowerbike View Postfalicon is the only one who does insert bearing cranks.
Not good info. Check this out. http://aperaceparts.com/mailers/crankmail.htmlSpeed Merchant
http://www.gszone.biz
Comment
-
Originally posted by Big Jay View PostNot good info. Check this out. http://aperaceparts.com/mailers/crankmail.html
i stand corrected!
Comment
-
Parts
Ray, I was thinking $430 shipped for the Staight gear billet Basket. $340 shipped for the 40mm CV's with the special 38mm float bowls and dial-a-jets.
I have some stock trannies too along with an all stock 1150 cyl. Though I think I want more than you want to pay.
Or, amke Z offer?
Tanks and sorry about boosting the thread.
Gregsigpic1983 1100 Katana - soon to be turbo Busa powered.
2007 GSXR1K-Sold-But not forgotten.
Have 2X ZG14 engine's for '81 GS750E project.
'82 GS750E frame is TITLED awaiting GSXR1127/12B engine and '81 1100E slowly being built.:eek:
Comment
-
Originally posted by gmansyz View PostRay, I was thinking $30 shipped for the Staight gear billet Basket. $340 shipped for the 40mm CV's with the special 38mm float bowls and dial-a-jets.
I have some stock trannies too along with an all stock 1150 cyl. Though I think I want more than you want to pay.
Or, amke Z offer?
Tanks and sorry about boosting the thread.
Greg
YOUR KILLING ME!
Comment
-
Yes, I typed too quickly and made a Booboo. It was supposed to be $430 so I editted it.
Sorry.
Gregsigpic1983 1100 Katana - soon to be turbo Busa powered.
2007 GSXR1K-Sold-But not forgotten.
Have 2X ZG14 engine's for '81 GS750E project.
'82 GS750E frame is TITLED awaiting GSXR1127/12B engine and '81 1100E slowly being built.:eek:
Comment
-
Only a few? Does it mean I am overpriced?
I am still waiting for Ray to pull the trigger on it as he has asked a few time before.
Make an offer at least. Otherwise, it will be the Ebay.
Tanx
Gsigpic1983 1100 Katana - soon to be turbo Busa powered.
2007 GSXR1K-Sold-But not forgotten.
Have 2X ZG14 engine's for '81 GS750E project.
'82 GS750E frame is TITLED awaiting GSXR1127/12B engine and '81 1100E slowly being built.:eek:
Comment
-
Originally posted by gmansyz View PostOnly a few? Does it mean I am overpriced?
I am still waiting for Ray to pull the trigger on it as he has asked a few time before.
Make an offer at least. Otherwise, it will be the Ebay.
Tanx
G
lol!
my price is very fair compared to a brand new billet basket and yours is even a better deal.
even in a bad economy these parts are valuable and to replace these parts with new...the manufacturer keeps raising there prices.
Comment
Comment