A small Big Bore

RacingJake

Forum Sage

Join Date: Jun 2003

Posts: 2698

Location: Abilene Texas
#1

A small Big Bore

12-05-2003, 10:41 AM

Got the 13-1 pistons installed on the rods and then lower the 1166 block onto the case. Those's pistons look mean in there. Going to do a little polishing on the head and replace the valve seals before installing it, and I should have my air shifter hooked up by next week too.

Jake
Step by Step

1166cc 1/8 ET 6.09@111.88
1166cc on NOS, 1/8 ET 5.70@122.85
1395cc 1/8 ET 6.0051@114.39
1395cc on NOS, 1/8 ET 5.71@113.98 "With a broken wrist pin too"
01 Sporty 1/8 ET 7.70@92.28, 1/4 ET 12.03@111.82
Tags: None
Hoomgar
#2

12-05-2003, 10:55 AM

Be sure to give us pictures when it is done Jake.

Also a pic of those pistons would be cool
Comment
RacingJake

Forum Sage

Join Date: Jun 2003

Posts: 2698

Location: Abilene Texas
#3

12-05-2003, 11:42 AM

You asked for it, so here you go.

To see pictures just hit my WWW button at the bottom of the screen and you can check it out.

Jake

1166cc 1/8 ET 6.09@111.88
1166cc on NOS, 1/8 ET 5.70@122.85
1395cc 1/8 ET 6.0051@114.39
1395cc on NOS, 1/8 ET 5.71@113.98 "With a broken wrist pin too"
01 Sporty 1/8 ET 7.70@92.28, 1/4 ET 12.03@111.82
Comment

Announcement