My winter project

[Anonymous]

Its almost finished. Still need to mount the headlight and the speedometer.then paint the body parts http://img.villagephotos.com/p/2003-...ds-gs750-6.jpghttp://img.villagephotos.com/p/2003-...fc-gs750-7.jpg

[robinjo]

WICKED!

[rosco15]

Looks pretty sweet.

Ryan

https://www.rccracing.com

[Anonymous]

Thanks The bike is a 1981 GS750
the engine is a 81 1100 1394cc
turbocharged
2000 GSXR 750 front end
1998 GSXR 600 swingarm 6"-12" over
hayabusa wheels
the chassis is powdercoated

[Anonymous]

Drool 8O :P :P :P

[Hoomgar]

Jammin, I would love to take a burn on that!
Let us know what kind of times your getting when you get it to the track

[Anonymous]

Hoomgar When the engine was in my car tire drag chassis it went 5.17@ 134 mph in the 1/8 mile

[Hoomgar]

Hoomgar When the engine was in my car tire drag chassis it went 5.17@ 134 mph in the 1/8 mile

now I'm drooling =P~

[Anonymous]

How hard was it to put a GS1100 engine in the GS750 frame. Is there a place (website) where I could look up the interchangablilty with parts between the 750/1000/1100?

thanks

Thanks The bike is a 1981 GS750
the engine is a 81 1100 1394cc
turbocharged
2000 GSXR 750 front end
1998 GSXR 600 swingarm 6"-12" over
hayabusa wheels
the chassis is powdercoated

[Anonymous]

The engine bolted in no trouble only the two mounts at the bottom under the crank dont line up . I just made a new plate that bolts to the frame. The 750-1000 frames are the same as far as those bottom bolts not lining up

[Anonymous]

Thanks! Is it true the exhaust is the same for the 750/1000/1100?

The engine bolted in no trouble only the two mounts at the bottom under the crank dont line up . I just made a new plate that bolts to the frame

[Anonymous]

dont know i never had one that had the stock exhaust i do know that aftermarket exhaust will bolt to all these engine im not sure about bolting to the frame in the back

[Anonymous]

As far as the exhaust goes, I think the angle of the head and cylinders are a little different between the 8v and 16v. I bought an exhaust on ebay for my 79GS750E and the collector hangs pretty low. I believe it was for a 1980 1100 or so as I compared them when I had both bikes.I can't get in your pics, too much traffic I guess. That is a good sign!

[Anonymous]

if you would like to see the pictures e-mail me@ turbolt@aol.com