Dave
Announcement
Collapse
No announcement yet.
GSXR HEAD ON A GS
Collapse
X
-
AnonymousTags: None
-
Anonymous
It?s doable, quite easy actually. But I don?t think you want to run it on the street, but the strip, since the cooling aint as good on the GS since the R is oilcooled by spraying the under side of the pistons. Further you must install a topend oiling kit since the R?s don?t lube like the GS.
However it looks nice, look at www.bertaut.com/gssuzuki.html , but the benefits are of doubt to me since the combustionchambers are the same(TSCC). Ok, the ports are a little bigger and the valves org. are 28,5mm and 25mm and last the ports are a little more steep than the GS.
Edit: removed the comma after the www. and linked it properly.
-
Anonymous
-
Dink
-
Anonymous
I only see two pictures of a gsxr head at that link. thant link is what gave me the idea in the first place. Dave :roll:
Comment
Comment