Need listing of carbs that will fit 1980 GS1100E :-)

[Anonymous]

Can anyone give me a simple listing of the different kinds of carbs that will fit my 1980 GS1100E? Presently, I have the stock Mikuni BS34SS...which is fine....but I'd like to know about some additional options. I'm not concerned with the modifications I'd have to make...I can research that at a later time...simply what carbs my bike can take...either new or old.

Thank you!

Rudi

P.S. I just checked bikebandit.com for carbs...here are some...would any of these work? http://www.bikebandit.com/partsbandi...785&sel_path=3

[SqDancerLynn1]

If your bike is stock I would stick to the original carbs If you want NEW very expensive $$$$$$ contact http://www.sudco.com they can fix you up with what ever you want. Or some 38mm flat slides Check ebay

[Anonymous]

If your bike is stock I would stick to the original carbs If you want NEW very expensive $$$$$$ contact http://www.sudco.com they can fix you up with what ever you want. Or some 38mm flat slides Check ebay

But are the old stock carbs as "good" as the newer ones? I am curious about what new technology I may be missing out on....if any. :-)

[RacingJake]

I'm running 750 GSXR 38mm CV carbs on a 1166 13-1 with g4 cams. I'm running 165 main jets and the bike runs great. I was thinking of trying 170 and 175 jets one day just to see what happens. Found them for 75 bucks and figure why not give them a try. If they did'nt work I'd just resale them and would'nt loose anything.

It's a tight fit using stock boots but it can be done. If they are too old they may split.