Announcement

**nawelding** · 11-16-2016, 07:15 AM

Now that I have a little handle on this.
I will get ya some pictures tonight.
Thanks for your patience with me on this.

**nawelding** · 11-16-2016, 06:29 PM

so much for having a handle on this.
can you tell me how I canput up a picture if my crank trigger.
My air gap is .020 and the wheel is 3/16 thick .
I have tryed to do a log but getting any luck as of yet Thanks

**salty_monk** · 11-16-2016, 09:13 PM

Photobucket works as well as any other site for pics. Upload your picture there & then copy the IMG code & paste it here. www.photobucket.com make your album public

**free99** · 02-14-2021, 12:06 AM

Pity that this project has been seemingly shelved.. Well, time to pick up the clues and continue forth.

Would anyone still have the wiring diagrams available? Thanks kindly.

**salty_monk** · 02-16-2021, 11:31 PM

I'll have a look but I don't think I saved them anywhere... sometimes I pull stuff from here to a file for prosperity

**Peter#1266** · 06-24-2021, 05:26 AM

If I can find a manifold from some donor bike with port spacing to suit a GS1100G I'd like to have a go with a Speeduino controller. The flanged hole in the fuel tank where the gauge sender mounts would make it easy to get the pump in the tank. www.speeduino.com

**GSX1100 dreamn** · 07-05-2021, 08:47 PM

My Kat rebuild - The GSResources Forums

https://www.thegsresources.com/_forum/showthread.php?257052-My-Kat-rebuild

Are you doing a restoration project of some kind on a GS? Let everyone see what you are doing by posting the details here.

I have been using 1250 Bandit as a donor

**GSX1100 dreamn** · 07-05-2021, 08:50 PM

And this guy was on Facebook, to suit 1100 and 1200 oil cooled

**GSX1100 dreamn** · 07-05-2021, 08:51 PM

My 1260 Kat.
See below for thread link.

**1948man** · 07-06-2021, 11:43 AM

Beautiful. Great work.

**GSX1100 dreamn** · 07-06-2021, 05:44 PM

Thanks, I use as my commuter bike to work, rain hail or shine.
A bit slap hazard in parts but it is my project bike as well.
Nearly 2 years now non stop riding to work with this EFI.
Cheers Andrew.