Announcement

Collapse
No announcement yet.

Height check on std GS1000 cylinders

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Height check on std GS1000 cylinders

    anyone out there that can tell me height of cylinder block on unmolested gs1000
    ie height from surface that mates to crankcase up to top of cylinders
    ozman

    #2
    If no one beats me to it, I'll reply tomorrow. I'm not going out to measure in the rain....
    I've got several 1000 barrels here, one must be untouched I'd hope.

    Comment


      #3
      Two of mine appear untouched at 87.0mm

      If you're looking at 66mm stroke you need a GS1100G barrel.

      Comment


        #4
        Originally posted by GregT View Post
        Two of mine appear untouched at 87.0mm

        If you're looking at 66mm stroke you need a GS1100G barrel.

        thanks greg
        i already have 66mm stroke and using gs1100g barrel
        need this measurement for something else

        ozman

        Comment

        Working...
        X