.png "Powered by vBulletin")
Has anyone succesfuly installed an oil radiator on a 81 GS1000G?
Which year/model radiator kit will fit?
Which year/model radiator kit will fit?
-
-
Not on a "G", but on "E" and "S" models. Mine used a Lockhart adapter at the oil pressure sender gallery. For coolers, one Lockhart and one Suzuki GSXR from the mid '90s. There was a fellow member who sold his adapter units on here once upon a time, but he may no longer be here. Some have made their own as well. If you search for it you may find a thread or two on the subject. Ray"Nobody goes there anymore, it's too crowded" -Yogi Berra
GS Valve Shim Club http://www.thegsresources.com/_forum...d.php?t=122394
1978 GS1000EC Back home with DJ
1979 GS1000SN The new hope
1986 VFR700F2 Recycled -
The answer is, you have to hook up a cooler via the oil-pressure switch cover (which lies on top of the crankcase behind the cylinder block). You can't use the plugged holes either side of the oil filter cover for the simple reason that there aren't any on the older 2-valve engines.
So what you need is an adapter plate like this: Found this looking around and thought it might help. I have seen a couple guys on here selling various adapters that will work for cheap also.sigpic 82 gs1100ez 1168 Wiseco,Web .348 Cams,Falicon Sprockets,Star Racing Ported Head,1mm o/s Stainless Valves,APE Springs,Bronze Guides,etc.APE Billet Tensioner,36CV Carbs,Stage 3 Dynojet,Plenum w/K&N filter,Trued,Welded,Balanced,Crank w/Katana rods & Billet left end, FBG backcut trans, VHR HD Clutch basket,APE nut,VHR High volume oil pump gears,1150 Oil cooler,V&H Megaphone header w/Competition baffle,Dyna S,Coils,Wires,etc.Other misc.mods.Comment
-
I have a nice Kerker cooler available.1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
Comment
Comment