.png "Powered by vBulletin")
Will any 2v 1100 cylinder fit on a 78 gs1000 case? Will the 1000 head fit the cylinder?
Thanks
Thanks
-
1978 Gs1085 compliments of Popy Yosh, Bandit 1200 wheels and front end, VM33 Smoothbores, Yosh exhaust, braced frame, ported polished head :cool:
1983 Gs1100ESD, rebuild finished! Body paintwork happening winter 2017:D
I would rather trust my bike to a technician that reads the service manual than some backyardigan that THINKS HE KNOWS how to fix things. -
In short answer yes.
I have a 1100g 2v cylinder on my78 gs1000.
Just check the deck.
If i remember the 1100 cylinder is a little taller than the 1000 bblock.
I have not used the 1000 head, i have a gk d shaped head on it.
The 1000 head should fit with a later style gasket because off the camchain tunnel.
Or a early style gasket, i dont remember, i have used a MLS head gasket.
Marchttps://www.thegsresources.com/_foru...ie_twisted.gif AIR COOLED MONSTERS NEVER DIE https://www.thegsresources.com/_foru...ie_twisted.gif
1978 GS1000C X2
1978 GS1000E X2
1979 GS1000S
1979 gs1000
1983 gs400e -
Thanks.
Time to look for one if compression does not come up after some miles.
1978 Gs1085 compliments of Popy Yosh, Bandit 1200 wheels and front end, VM33 Smoothbores, Yosh exhaust, braced frame, ported polished head :cool:
1983 Gs1100ESD, rebuild finished! Body paintwork happening winter 2017:D
I would rather trust my bike to a technician that reads the service manual than some backyardigan that THINKS HE KNOWS how to fix things.Comment
Comment