Announcement

Collapse
No announcement yet.

BUILDING AN I.C.B.M. KATANA 1100

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    You can use the SV starter button control and buy a Mikuni P/P complete throtle from Schnitz Racing. Here is the part number and price. 21417 Throttle with push & pull cables, no gribs $49.95

    Comment


      Originally posted by Gerry
      When I was looking for a push pull throttle for my 38 smoothies I had used a set off a mystery bike that were the right length. When I put the 89 gsxr front end on I had to get longer cables, so I just made them. They didn't last!! The problem was finding a set with the right ratio. The newer bikes have a shorter distance to open the carbs and that is the last thing you want with the smoothies. I think it would be like running a 1/4 pull throttle. What I ended up using was (I think 78 or 79) gs 1000 throttle. The cables are a little long but work. Keep in mind my bike is not the beauty yours is and appearance is not a big thing for me. They seem to work but I will be watching to see what you end up with to see if it will work for me.

      Good luck and heal well, Gerry
      If the cables you are using are standard GS1000 78/79 cables the shorter "S" are still available from Suzuki Canada PN:58300-45601 and are about 4" shorter. Cost about $40.00CDN each but would probably fit much nicer.
      '84 GS750EF (Oct 2015 BOM) '79 GS1000N (June 2007 BOM) My Flickr site http://www.flickr.com/photos/soates50/
      https://farm5.staticflickr.com/4306/35860327946_08fdd555ac_z.jpg

      Comment


        Sandy

        If the cables you are using are standard GS1000 78/79 cables the shorter "S" are still available from Suzuki Canada PN:58300-45601 and are about 4" shorter. Cost about $40.00CDN each but would probably fit much nicer.

        Hey, thanks, I'll check into it.

        Comment


          Hey Rob,
          Sorry to read about your shunt. Shoulda known better than run the flatties without a return cable - they're a bit prone to vacuum sticking - but temptation (and impatience) is a powerful motivator, no doubt I'd prolly done the exact same thing.
          I'm glad you and/or the Kat aren't pranged beyond reasonable repair.

          I'm no stranger to shoulder problems (chronic recurrent dislocation on the left side, from a waterskiing biff many, many years ago)...makes sleep, ah, "problematic" sometimes.
          Mine's been acting up recently, for no good reason at all. It sucks bad.
          I feel your pain, bro' - trust me on that.

          Sounds like you're making good progress against the 'barriers to healing' that socialized healthcare present.
          Glad you have access and means to get the best orthopod possible, it makes a world of difference.
          I hope your recovery goes smoothly, and without setback.

          Ted

          Comment


            Originally posted by ronin1166
            Hey Rob,
            Shoulda known better than run the flatties without a return cable - they're a bit prone to vacuum sticking - but temptation (and impatience) is a powerful motivator, no doubt I'd prolly done the exact same thing.
            Ted
            Thanks Ted,

            I started off with some but they broke twice.

            What really chokes me I guess is I had sold a set of cables to a dude and he told me they didn't fit..too short for his riser bars so I sent him my other set with the understanding I would get get first set I sent back.

            He told me they were in the mail so I didn't bother to get some more thinking they would show up any time ... but they never did.

            I found the better they ran or the better tuned the carbs were the more they would hang up. when I first got them installed there was no sticking at all but as tuning got finer and finer they began to hang as performance got better.

            I guess that last adjustment was a good one.

            Was talking to a buddy today who knows a moto-crosser who broke his shoulder too and 4 months later he still can't raise his arm. He wasn't able to get surgery or didn't push hard enough I guess. I had to bypass 3 doctors and go directly to a specialist. I wasn't going to fart around.
            KATANA CUSTOMS/TECH

            Instagram: @rjmedia.tech, Updated more often, even from the events

            Comment


              almost lost my bed at the hospital tomorrow but ... it all worked out and surgery is on for 10am.

              I had a look-see today at the beast.. fixed the signal, turns out the mounting bolt was just pulled out and I fixed it. not a mark on it though. I turned the barend down to hide the grind and it is pretty much invisable from above the bars.

              I turned the engine over and took off the stator cover..all looks good. The mirror I will live with for a while but the lever and cover need replacing. I have brand new front pegs...fortunately I didn't install them. the ware ball is ground off the right peg but no biggie, will leave it on. I have another kat cover already blasted and ready for powder coat...the lever is 2 days away when I order and she is back in shape.

              I won't be riding till I get the throttle done though. My wife made me promise.....
              KATANA CUSTOMS/TECH

              Instagram: @rjmedia.tech, Updated more often, even from the events

              Comment


                good luck dude...b.b.

                Comment


                  gl Rob smart decision on the wait, it's hard but

                  Comment


                    Originally posted by katman
                    I won't be riding till I get the throttle done though. My wife made me promise.....
                    I'd think one arm bandit rides would be alittle hard until you get full use of your left arm. But then again I guess you could always power shift

                    Get well soon
                    1166cc 1/8 ET 6.09@111.88
                    1166cc on NOS, 1/8 ET 5.70@122.85
                    1395cc 1/8 ET 6.0051@114.39
                    1395cc on NOS, 1/8 ET 5.71@113.98 "With a broken wrist pin too"
                    01 Sporty 1/8 ET 7.70@92.28, 1/4 ET 12.03@111.82

                    Comment


                      Dude,
                      Hope all goes well for you and the machine. I have been following this thread for awhile, I has helped me in the rebuilding of my 83 1100e. Not to your extreme mind you, but to put it back into the world a monster on top of the world. Keep the faith, we all live in the rebuliding of our beasts through you!

                      Comment


                        Sorry you're hurt. But glad you are OK.

                        I washed out my front end once a while back. Got an "A-C" separation. So shoulder now sags away from my collar bone on the left side. The ligament connecting the 2 major shoulder bones gets stretched.

                        For those with shoulders that separate and wake themselves up at 3 am - try holding your arms out horizontally (like a scarecrow) for 1 to 3 minutes a day. This will build your deltoids up and reduce the separating. It takes about 1 to 3 months - given your starting physical condition and degree of damage.

                        I sleep at night now - even though I still cannot quite do the crawl in the city pool.

                        Again - good luck Rob - it should heal well with the surgical repair. Be sure to rehabilitate.

                        Comment


                          hows the wing doing, haven't heard from you in a while.

                          -ryan
                          78 GS1000 Yosh replica racer project
                          82 Kat 1000 Project
                          05 CRF450x
                          10 990 ADV-R The big dirt bike

                          P.S I don't check PM to often, email me if you need me.

                          Comment


                            Calling katman! Where are you buddy?

                            What's news man? You healing up?

                            How did the surgery go bro?

                            Bike back in order?

                            Concerned friends want to know

                            Give us a shout man


                            Rob hasn't posted since he said he was going for surgery in his post above. But that was over a month ago and his account has not gone idle.

                            Comment


                              Hi guys......

                              The surgery went well. the shoulder is healling very nicely..but.

                              I have contracted something post surger which has left me with very painful muscle and joints over my whole body. I am just now starting to ease up on the pain killers (and I rarely take painkillers. I stopped them second day after surgery until this started)

                              haven't even looked at the bike in weeks. No energy and unable to stand or sit for any length of time. This is really sucking but not much I can do.

                              Until this eases up again I will be pretty scarce around the board. I am only picking up email every couple weeks.

                              I'll be back when I get healthy again....thanks for the concern guys...

                              rob.
                              KATANA CUSTOMS/TECH

                              Instagram: @rjmedia.tech, Updated more often, even from the events

                              Comment


                                Thx for the update Rob and taking time to pop in. I was truly getting worried having not seen or heard anything.

                                I encourage you to get checked for c-dif. It is very common for hospitals to give that to their patients post op and it gives you the symtoms you describe. That is unless you already know what they gave you?

                                If not and next you start to get a lot of gas, please, get checked. c-dif will kill you if left unattended. I just lost my father inlaw to it two years ago. There is no reason that he had to die, we all got ripped off big time. It was not his time yet.

                                Get well buddy. Praying for you!

                                God bless.

                                Comment

                                Working...
                                X