Announcement

Collapse
No announcement yet.

Bars are on

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    Bars are on

    Bars are on. Going to the track tonight and will see what happen. 6.50 might be a goner.

    1166cc 1/8 ET 6.09@111.88
    1166cc on NOS, 1/8 ET 5.70@122.85
    1395cc 1/8 ET 6.0051@114.39
    1395cc on NOS, 1/8 ET 5.71@113.98 "With a broken wrist pin too"
    01 Sporty 1/8 ET 7.70@92.28, 1/4 ET 12.03@111.82
    Tags: None
    #2
    That's one fancy lookin machine!

    Nice paint.

    Michael

    Comment

      #3
      time for some rearset pegs and long shifting rods

      Comment

        #4
        Very nice, do you have an air shifter?

        Comment

          #5
          Yeap i got one and I love it. No more mis-shifts. As for paint it's sun bleach

          Got 11 runs in tonight before I notice a hairline crack at the left front engine mount that's right below the block. Going to get it welded before it breaks in two. After I re-ajusted the bars a few times do to the bike flying off to the left I finally got it going straight. My best 60ft was 1.52, 330ft was 4.24, and ET was 6.61. I put in a 7K msd chip in the 2 step for launching and the bike pulls hard off the line now, maybe to hard and that caused the hairline crack at the motor mount. I know with some more practice with the bars I think I could of got in 6.50's and 1.40's 60 footers. Oh well there's always next week if I can get it welded.

          Jake
          1166cc 1/8 ET 6.09@111.88
          1166cc on NOS, 1/8 ET 5.70@122.85
          1395cc 1/8 ET 6.0051@114.39
          1395cc on NOS, 1/8 ET 5.71@113.98 "With a broken wrist pin too"
          01 Sporty 1/8 ET 7.70@92.28, 1/4 ET 12.03@111.82

          Comment

            #6
            Your making me want to get into draging Jake
            Very nice indeed.

            Comment

              #7
              Originally posted by Hoomgar
              Your making me want to get into draging Jake
              Very nice indeed.
              You know, with your engine being rebuilt, this is the ideal time to build up the engine. :twisted:

              Comment

                #8
                Originally posted by lhanscom
                Originally posted by Hoomgar
                Your making me want to get into draging Jake
                Very nice indeed.
                You know, with your engine being rebuilt, this is the ideal time to build up the engine. :twisted:
                I do plan on making a few passes to see what we got when it is back together. I never got areal good time before with it being a lard butt and
                having the bike mostly stock. Times were in the high 12's at best.

                Comment

                Previous template Next
                Working...
                X