Announcement
Collapse
No announcement yet.
Can spark plugs cause power loss at certain RPMs?
Collapse
X
-
Badooka
-
I second Badooka I would check and clean and tighten the connections at the coils, I have even put a small bead of solder at the coil connection, (primary) and (secondary) wires and cured the high resistance condition. Fixed a lot of ignition conditions in the early 80's with this little trick after being through several other dealerships. Tighten and olm test the caps. Just a thought. Also get the proper heat range , your messing with borderline detonation possibly. Throw those Champion plugs away!!!!! They are for Briggs and StrattonLast edited by gs11ezrydr; 03-10-2014, 08:19 AM.sigpic 82 gs1100ez 1168 Wiseco,Web .348 Cams,Falicon Sprockets,Star Racing Ported Head,1mm o/s Stainless Valves,APE Springs,Bronze Guides,etc.APE Billet Tensioner,36CV Carbs,Stage 3 Dynojet,Plenum w/K&N filter,Trued,Welded,Balanced,Crank w/Katana rods & Billet left end, FBG backcut trans, VHR HD Clutch basket,APE nut,VHR High volume oil pump gears,1150 Oil cooler,V&H Megaphone header w/Competition baffle,Dyna S,Coils,Wires,etc.Other misc.mods.
Comment
-
Originally posted by TopTechRacing View PostDetonation.
I live and ride mostly at high elevations.
Comment
-
safwan.khan
Thanks for the input mate. I'll have a look at those coils as well!
Originally posted by gs11ezrydr View PostI second Badooka I would check and clean and tighten the connections at the coils, I have even put a small bead of solder at the coil connection, (primary) and (secondary) wires and cured the high resistance condition. Fixed a lot of ignition conditions in the early 80's with this little trick after being through several other dealerships. Tighten and olm test the caps. Just a thought. Also get the proper heat range , your messing with borderline detonation possibly. Throw those Champion plugs away!!!!! They are for Briggs and Stratton
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35618
- Torrance, CA
Originally posted by safwan.khan View PostDo NGK dp8ea-9's match with NGK B8ES and NGK dp7ea-9's with NGK B7es? Any suggestions guys?Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
safwan.khan
Couldn't find a decent supplier locally. Even the so-called NGK dealers do not have these spark plugs and they refused to import since I wasn't ready to buy more than a thousand pieces from them. The next time I'll hit the market I'll probably be looking for other alternatives like Denso W24ES-U's.
Originally posted by tkent02 View PostCan't you special order some NGK B8ES?Last edited by Guest; 03-17-2014, 12:28 PM.
Comment
-
safwan.khan
Thanks for the info bro. Actually I've seen some modern alternatives being regularly introduced by spark plug companies so was wondering if there exists a newer alternative of B8ES which I am unaware of. Everywhere I see only platinum, iridium, "awsomenium" spark plugs for "better spark" and "better fuel economy" but no genuine old school reliable parts.
Originally posted by Nessism View PostThe D-series NGK's are smaller diameter threads than the B-series.
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35618
- Torrance, CA
Did you look though that spark plug cross reference guide posted earlier? There are something like 75 interchangeable plugs for you to choose from. You telling us that none of these are available? It's okay to move up to platinum or what have you, just get the size and heat range correct and you should be good to go.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
safwan.khan
The local market here is filled with high heat range plugs. Not enough parts available here easily. I'm looking forward to import me some from US or Japan.
Originally posted by Nessism View PostDid you look though that spark plug cross reference guide posted earlier? There are something like 75 interchangeable plugs for you to choose from. You telling us that none of these are available? It's okay to move up to platinum or what have you, just get the size and heat range correct and you should be good to go.
Comment
-
safwan.khan
Finally got NGK B8ES Solid from a local seller. New out of old stock. Now all power loss problems seem to be solved and she is running SWEET as hell on higher rpms. (Price per plug: 130 PKR = $1.32) I've bought myself 10 of these. keeping 4 other pairs in my spare box.Last edited by Guest; 03-31-2014, 11:25 PM.
Comment
-
lrgguy
Comment