.png "Powered by vBulletin")
I just got a new fiberglass tank along with petcocks from Benjies Cafe Racers. I'm concerned that the outside of the tank under the petcock seal will start to corrode before long. Its just a coat of gloss paint over fiberglass. BCR told me to use aluminum washer and to cover the outside area of the tank under the petcock with some kind of sealer and that should do the trick. Any one have any advice on this besides "don't use fiberglass"?
-
-
Sorry, no answer to your question, but I am curious how fiberglass will "corrode".
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.) -
Uh, don't use fiberglass as a tank?sigpicMrBill Been a GSR member on and off since April 2002
1980 GS 750E Bought new in Feb of 1980
2015 CAN AM RTS
Stuff I've done to my bike:dancing: 1100E front end with new Sonic springs, 1100E swing arm conversion with new Progressive shocks installed, 530 sprockets/chain conversion, new SS brake lines, new brake pads. New SS fasteners through out. Rebuilt carbs, new EBC clutch springs and horn installed. New paint. Motor runs strong.Comment
-
ethenol will eventually breakdown fiberglass. thats why they seal the inside of the tank. But the leaks usually occur at the junction of the petcock/tank.Comment
-
The people who built the tank can't offer any more specific advice than "some kind of sealer"?
If you need something that's thin and flexible, Hylomar would work.
RTV obviously won't work, along with just about anything you'll find in an auto parts store. Epoxies get very hard and brittle, so that's probably not what you need either.1983 GS850G, Cosmos Blue.
2005 KLR685, Aztec Pink - Turd II.3, the ReReReTurdening
2015 Yamaha FJ-09, Magma Red Power Corrupts...
Eat more venison.
Please provide details. The GSR Hive Mind is nearly omniscient, but not yet clairvoyant.
Celeriter equita, converteque saepe.
SUPPORT THIS SITE! DONATE TODAY!
Co-host of "The Riding Obsession" sport-touring motorcycling podcast at tro.bike!Comment
-
Wonderful.Originally posted by bwringer View PostThe people who built the tank can't offer any more specific advice than "some kind of sealer"?Comment
-
The inside of the tank was coated with caswell sealer. im going to contact them to see if that is what I should use on the outside.Comment
Comment