Announcement

Collapse
No announcement yet.

Electronic speedometer pick-up from gearbox front sprocket?

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    Electronic speedometer pick-up from gearbox front sprocket?

    I believe the GSXR 1000's from 2003/4 used a hall sensor pick-up located in the engine sprocket cover?
    Can anyone confirm if this is correct and better, send a few pictures to see how it is done?
    The purpose would of course be to use a modern speedometer like the one used on this GSXR model : http://www.cmsnl.com/suzuki-gsx-r100...9.html#results
    Beyond that it would greatly facilitate the use of 18" GSXR first gen front wheels in the GS 1000 OEM forks.
    Fitting the speedometer pick-up should be easy with a racing type sprocket cover as fitted on my GS 1000 ST
    sigpicJohn Kat
    My bikes: CB 77, GS 1000 ST Cafe Racer with GSXR 1052 engine, GS 1000 ST, XR 41 Replica with GS 1085 engine,
    GS 1100 SZ Katana with GS 1135 EFF engine, KTM Superduke 1290 R 2020
    Tags: None
    #2
    Some of the Bandit 1200's used them as well. Not sure of the years - I think it was the 2nd generation (pre water-cooled).
    Current:
    Z1300A5 Locomotive (swapped my Intruder for it), GS450 Cafe Project (might never finish it....), XT500 Commuter (I know - it's a Yamaha :eek:)

    Past:
    VL1500 Intruder (swapped for Z1300), ZX9R Streetfighter (lets face it - too fast....), 1984 GSX750EF, 1984 GSX1100EF (AKA GS1150)
    And a bunch of other crap Yamahas....

    Comment

      #3
      sv1000s uses the same setup too. Link to pics: http://rj45.org/sv1k/faq/speedo2.htm?newwin=true

      Comment

      Previous template Next
      Working...
      X