looking for an extended 1150 swingarm

[4cyl h2]

how about it trip you got picsand length?

[trippivot]

DSC00003.jpgThis is about 10 characters

[trippivot]

DSC00001.jpg from pivot to axle adjustment is 26 to 28 inches

[trippivot]

DSC00005.jpguses the stock linkage - I spent some time lining up the wheel

[blowerbike]

28" is 5 over stock.
hey trip this guy is interested in your arm...shipping would kill my deal.

[trippivot]

DSC00007.jpgso close but oh so far .. Want a complete rolling chassis?

[trippivot]

I knew it was not 8 or 12 but this one can be made longer still and if you have a second one it can be made pretty again. I am changing to chromoly / air tank/foot peg multi unit.

too bad this wont help either of us $450 for it
DSC00006.jpg

[stetracer]

Just a newbie question.
Do swingarm slip-on extensions work or should a solid arm always be used?
I am guessing it depends on the horsepower?

I am not sure if anyone makes bolt on extensions for a 1150. Slide in extensions have to be welded and work fine. But bolt on extensions work great on a Bandit arm. When you start putting some serious HP down then you might want an under braced arm

[blowerbike]

I knew it was not 8 or 12 but this one can be made longer still and if you have a second one it can be made pretty again. I am changing to chromoly / air tank/foot peg multi unit.

too bad this wont help either of us $450 for it
[ATTACH=CONFIG]36866[/ATTACH]

my extended arm is done the same as yours with solid block..same length and all...just ugly.
as of late the ship shop i use has been killing me on larger items so that kills any sales most the time.
if the OP is close/semi close to you then that would be the route to go.

[steve murdoch]

Thanks for the info, Stet.

[4cyl h2]

thanks to all who offered and tried to help found 1 only a 6 over but is in good shape and was priced right have to try it at the track next year, might still want a longer one if a good deal comes along , after looking at the 1150 it looks like it would be easy to convert to twin shock 1100 arm anybody got pics of one??? never realized