.png "Powered by vBulletin")
Found out I've got a set of gs1150 cams marked yrd. St 1. Wondering if anybody knows for sure what they are. With 0 lash lift on the dial is showing right at 320 on both cams. Haven't measured duration yet took measure with a standard Gs1100 rocker arm
-
-
Some photos of the markings would help.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection -
In school I had a teacher who would give all the time you needed in a test. It was open book as well because that is the way the real world was. However, if you wrote a number down without units it was wrong and marked as wrong.
Is 320 duration in Deg, Or milli radians of lash? How much the cams weigh in Deci-lbs? or what.
1150 stock lift is Intake 0.315"(8.0mm) and Exhaust is 0.295"(7.5mm)
Comment
-
-
Those are Yoshimura Stage 1 cams.
Ray.Comment
-
Thanks ray. Any chance you know the listed specs. I'm gonna guess just mild drop insOriginally posted by rapidray View PostComment
-
I believe they were .335 lift & 248 duration.Comment
-
jay thanks for the tip looks like you were correctOriginally posted by rapidray View Post
ray thanks for confirming and the cam infoComment
.png)
Comment