Gs550 l bars on an gs550e

[Guest]

Hi i was just wondering ,i have an 86 gs550e does anyone know if it's at all possible to change the bars from clip on to pull back bars such as an gs550 l ?if i can find a steering stem head and bars from an l model would it fit,just looking for abit more comfy riding position.I know i should have bought an l model but i have what i have and have to deal with it' it's just a thought.


Thanks

[tkent02]

Putting on L bars to be comfortable?? That's a new one.

[rlg5]

Putting on L bars to be comfortable?? That's a new one.

What would you suggest i'm open to all ideas?

[tkent02]

What kind of riding position do you like?

[rlg5]

What kind of riding position do you like?

more of an upright position,my arms are fully extended on this bi keand i feel like im leaning on the bars my hands hurt,just not comfortable riding this bike.

[Rob S.]

I know i should have bought an l model...

Uh oh, trouble...fight! Fight! (I feel like Cartman).

[mapball]

Is this what your bars looks like now or are they the café style clip ons that put you in a tucked position?

1985_GS550E-ES_sales1b_800.jpg

[phydeauxmutt]

I know tkent was biting his tongue, but he is rather correct, Suzuki "L" bars are probably the WORST bars available on a bike.

Not sure what your bars are now, but they might be rather low, as mapball suggests. Since you said you had to find a steering head, I am guessing that you might have clip-on style bars. When you find your 'new' steering head, look for a set of older "E" or "G" bars. They are considerably higher than what you have now, but not nearly as high as the "L" bars. By the way, it's not the height of the "L" bars that makes them uncomfortable, it's the angle of the wrists. Kawasake LTD bars and Yamaha Classic bars were also high, but the wrist angle was much more friendly.