GS 1000 spoked wheels?

[Guest]

Trying to get new spokes from Bucchan, but they want the specs for spokes which I cut off and trashed ! Also hub hole sizes and rim hole sizes because I had Hub and rims powder coated already!
Any help would be great you think the would have info. Because they used to sell the kit?
front 19" rear 18" aluminum wheels. Thanks Andrew!

[steve murdoch]

Some good info in this thread from Joe Nardy.

http://www.thegsresources.com/_forum/archive/index.php/t-217700.html

[Bluesmoke69]

Thanks interesting but want the exact right one for the wheel. Thank again.

[sharpy]

Ok if those are standard rims try this info. Rear wheel... 145 mm inners with 6mm neck at 85 degrees and on the outers 144 mm with 7mm neck at 90 degrees. Spokes are 8 gauge narrows to 10 gauge with 250 thou nipples. On the front inners are 190 mm with 5mm neck at 80 degrees and the outers are 189 mm with 6mm neck at 94 degrees. Same as rear 8 gauge then 10 gauge with 250 thou nipples. If you dont know what that means they should. And check your hubs for worn holes. you mite need larger spokes.