Rear Sprocket Install

[Guest]

Searched for a while to see if it had already been posed but no detail on the question so i apologize if its already been answered. Started the old 630 to 530 conversion on my 81' 1100E and so far so good the only real question I can't find an answer too is which side of the sprocket faces outward. Got everything from Z1 enterprises and went with the Jt sprockets 49 tooth rear. One side of the sprocket is flush with the teeth, but the opposite side is recessed maybe 2 - 3 mm. The OE sprocket is flush on both sides so no help there. I would assume that the recess would face out considering the front sprocket already has to be shimmed for alignment so im turning to the experts for any advise.

[niclpnut]

Recess faces out.

Nic

[rustyspokes]

Awesome kinda figured but all I needed to hear. Appreciate the response