Announcement

Collapse
No announcement yet.

nitrous fogger install

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    nitrous fogger install

    I am looking for a little advice on taping the intake/carb boots on my gs1100 for nitrous foggers. what can i use to help seal them in good? i tried searching but couldn't find and threads. maybe a write up is in order?

    #2
    Yah spelled fokker wrong!
    JK
    1983 GS 550 LD
    2009 BMW K1300s

    Comment


      #3
      You will use a 1/8 pipe tap to thread your head & teflon tape to seal the threads.
      Ray.

      Comment


        #4
        Don't the NOS foggers use a 1/16 NPT?

        Comment


          #5
          You may find that when nitrous is not engaged there may be less power than before the nitrous installation. The nozzles take up a fairly large percentage of the area inside the boots with nozzles installed thereby reducing flow volume

          Comment

          Working...
          X