Announcement

Collapse
No announcement yet.

Spacer size gs1000

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Spacer size gs1000

    Hi guys,
    Doing a chain and sprocket conversion to 530...my dealer says they can't get me the spacer...going to see if I can get one at my local machine shop...can someone give me the dimensions of the spacer I need?
    Thanks
    No signature :(

    #2
    Originally posted by trevor View Post
    Hi guys,
    Doing a chain and sprocket conversion to 530...my dealer says they can't get me the spacer...going to see if I can get one at my local machine shop...can someone give me the dimensions of the spacer I need?
    Thanks
    6MM thick. https://www.amazon.com/JT-Sprockets-.../dp/B001AVVUZ2
    dimensions http://www.jtsprockets.com/catalogue/sprocket/JTF518B
    sigpic
    09 Kaw C14 Rocket powered Barcalounger
    1983 GS1100e
    82\83 1100e Frankenbike
    1980 GS1260
    Previous 65 Suzuki 80 Scrambler, 76 KZ900, 02 GSF1200S, 81 GS1100e, 80 GS850G

    Comment


      #3
      Also, it goes under the nut, not under the sprocket. A couple washers from the hardware store would work OK if you can't get one.
      sigpic
      09 Kaw C14 Rocket powered Barcalounger
      1983 GS1100e
      82\83 1100e Frankenbike
      1980 GS1260
      Previous 65 Suzuki 80 Scrambler, 76 KZ900, 02 GSF1200S, 81 GS1100e, 80 GS850G

      Comment


        #4
        Thanks Bob....
        No signature :(

        Comment


          #5
          I can send you one if you want. I looked on amazon.ca and it looks like you get hosed, eh. I can get one Friday for $6.70 delivered.
          sigpic
          09 Kaw C14 Rocket powered Barcalounger
          1983 GS1100e
          82\83 1100e Frankenbike
          1980 GS1260
          Previous 65 Suzuki 80 Scrambler, 76 KZ900, 02 GSF1200S, 81 GS1100e, 80 GS850G

          Comment


            #6
            You can get something that'll work at the hardware store. I had to clearance them with a dremel slightly from memory. 2mm each. Stack of 3. It's only to make sure the nut tightens down on something.
            1980 GS1000G - Sold
            1978 GS1000E - Finished!
            1980 GS550E - Fixed & given to a friend
            1983 GS750ES Special - Sold
            2009 KLR 650 - Sold - gone to TX!
            1982 GS1100G - Rebuilt and finished. - Sold
            2009 TE610 - Dual Sporting around dreaming of Dakar..... - FOR SALE!

            www.parasiticsanalytics.com

            TWINPOT BRAKE UPGRADE LINKY: http://www.thegsresources.com/_forum...e-on-78-Skunk/

            Comment

            Working...
            X