Announcement

Collapse
No announcement yet.

GS 650 engine from 83 on a 78ish gs550 frame?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    GS 650 engine from 83 on a 78ish gs550 frame?

    Hi guys.
    New guy from denmark here!
    I have a gs550 from 77/78 and i wonder if a gs650 engine will fit My 550 frame og do the topend fit My 550 engine?
    I Hope the information where enough.

    #2
    And will i be able to convert the 650 engine to kickstart from My 550?

    Comment


      #3
      Hi there, the gs650 engine will not go in the gs550 frame or not with out a lot of ****ing because of the shaft.
      The gs650 top end will go on the gs550 bottom end.

      Comment


        #4
        Hi thanks for the fast reply
        So it should be an easy fix to put the 650 cylinder and top on My 550 Block?

        Comment


          #5
          Hold on a minute here.

          Is your 650 engine chain drive or shaft drive

          Comment


            #6
            Both engines Are chain driven

            Comment


              #7
              Then yes the 650 engine will fit you'll just end up with a 5 speed instead of a 6 speed. Lot less work than doing the topend swap. Don't worry about the kickstarter, you don't need one.

              Comment


                #8
                But the kickstarter is so cool 😎

                Comment


                  #9
                  I am so excited to hear that it will fit!

                  Comment


                    #10
                    There are several long thread here where guys converted their 550 to 650. Just swapping in the engine is easier though.

                    Here is one such thread...http://www.thegsresources.com/_forum...50-699-project
                    Ed

                    To measure is to know.

                    Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

                    Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

                    Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

                    KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

                    Comment


                      #11
                      lots of threads with no finished pics or defining details...

                      Comment


                        #12
                        Defining detail..... Way more powerful than it was as a 550. Quicker, higher top speed and gets there a lot easier, chugs around slowly, you can whack the throttle open at 2,000 RPM in 6th gear and it chugs right out, or you can kick it down a few gears and scream it at 10,000, either way it's a lot more powerful than the 550 was doing the same thing. Its gone from a wimpy little bike with a great top end kick to a really useful motorcycle that pulls hard anywhere and everywhere.
                        You want a picture? I'll post one as soon as photobucket gets back up.
                        http://img.photobucket.com/albums/v5...tatesMap-1.jpg

                        Life is too short to ride an L.

                        Comment


                          #13
                          Originally posted by Radrider View Post
                          Hi thanks for the fast reply
                          So it should be an easy fix to put the 650 cylinder and top on My 550 Block?
                          Not all that easy. You have to split the cases to hog the upper one out for the 650 cylinder's bigger sleeve diameter. Quite a bit of metal had to be ground away.
                          http://img.photobucket.com/albums/v5...tatesMap-1.jpg

                          Life is too short to ride an L.

                          Comment


                            #14
                            I think i will buy and put the complete 650 engine from 83 on My 550 frame from 77/78 i think and just miss My kickstarter :/

                            Comment


                              #15
                              Radrider. ..did you do the conversion? ?
                              Gs550

                              Comment

                              Working...
                              X