Announcement
Collapse
No announcement yet.
RearSets
Collapse
X
-
RearSets
I'm looking at doing a custom set of rear sets. Does anyone know where I could source a shift and brake arm that I can use for the linkage, or is my best bet salvaging some from a parts bike?Tags: None
-
one_civic
-
Nice mod one_civic!"Only fe' collected the old way, has any value." from His Majesty O'Keefe (1954 film)
1982 GS1100G- road bike, body, seat and suspension modded
1990 GSX750F-(1127cc '92 GSXR engine) track bike, much re-engineered
1987 Honda CBR600F Hurricane; hooligan bike, restored
Comment
-
gordinho80
Similar... I don't recall what they came off of, but I found them on Craigslist. I had a buddy cut some aluminum stock that I used to mount them to the existing peg holes.
Comment
-
Shift and brake arms can be made easily by using an appropriate length piece of tubing and welding nuts on each end. Heim joints can be had on ebay or most industrial supply stores.
Paul Jones
80 gs1100 16-v ported & polished, 1 mm oversize intake valves, 1150 carbs w/Dynojet stage 3, plus Bandit/gsxr upgrades
Comment
Comment